Tempatron - solid state relays

                  SOLID STATE RELAYS

WYPM PCB MOUNTED SINGLE PHASE  SSR

PCB mounted SSR for up to 3 Amps
The WYPM is a miniature, printed circuit board (PCB) mounted solid state relay (SSR) suitable for low power AC loads up to 3 Amps at 90 to 240Vac. It operates from a DC voltage of 3 to 32V, is zero voltage switching to prevent high levels of RFI noise and has input protection against reverse voltages applied to the input .

 

           
_________________________________________________________________________


WY SERIES SINGLE PHASE  SSR

Single phase SSR for 10 to 40 Amps
The WYG and WYH ranges are single phase SSRs suitable for 240Vac and 460Vac loads respectively. They are available with both AC(Z40) and DC(Z4) inputs and an output capacity from 10 Amps to 40 Amps continuous. With reverse input protection, Zero Crossover Detection, high opto-isolation between input and output and an integral snubber network to minimise the effects of fast inductive transients at turn-off, these SSRs are suitable for an extremely wide range of single load applications.


 

           
_________________________________________________________________________


WY3 SERIES THREE PHASE  SSR

3 phase SSR for 10 to 40 Amps
The WY3G range are 3-phase SSRs suitable for 230Vac loads. They are available with both AC(Z40) and DC(Z4) inputs and an output capacity from 10 Amps to 40 Amps continuous. With reverse input protection, zero crossover detection, high opto-isolation between input and output and integral snubber networks on each phase, these SSRs offer an economical solution to high current, 3-phase applications which require low noise and long life.

 

           
_________________________________________________________________________