The CT500 is a dual display multi-range, multi function
counter - timer that matches our PID500 range of temperature controllers.
The timer has two independently timed relay outputs and will operate in DE,
Interval or cycling modes with time ranges from 0.01 seconds to 9999 hours.
The counter has 4 operating modes as well as a batch counter output. The
display can count from 0.001 to 9999 and can be scaled to count up to 106.
The unit is available in 24Vac/dc and 90-270Vac operated versions.
The TD48 is a multi-function, multi-time range, digital
timer housed in an 11 pin plug-in 48 x 48mm case. The product offers 9
timing modes applied to two relay outputs. When only one of the timers is
being used, the other output acts as an instantaneous changeover contact.
The single model provides timing from 0.1 seconds to 100 hours and has four
start/reset modes using either the front panel buttons, an external switch
or auto start from power on.
The UMT 500 is a programmable digital timer with 5 relay outputs, each of
which has 5 independently selectable operating modes and an external
start/reset function. Each output can either be timed or instantaneous
making the UMT a particularly flexible unit for in-panel machine control
applications that do not warrant the cost or complexity of an industrial
PLC.
The UDT is a multi-function, multi-time range, digital
timer which may be powered from 18 to 264 Vac or dc. This single product
is therefore suitable for almost any industrial application including
those driven from 24 Vdc batteries such as diesel generators, pumps, and
back-up supplies. An internal lithium battery ensures that user settings
are retained in the event of power failure and, because of its low power
consumption, the UDT may be programmed without a supply, prior to
installation.
The TT32 programmable timer, packaged in a compact
75x33x69mm housing, is an extremely versatile product offering nine
operating modes applied to two timed output relay contacts. When only one
of the timers is being used, the other output acts as an instantaneous set
of changeover contacts. The single model provides timing from 0.1 seconds
to 100 hours and has four start/reset modes using either the front panel
buttons, an external switch or auto start from power
on.
The TE48 is a panel mounting or plug-in programmable
timer. Packaged in a 1/16th DIN housing with a dual LED display, it is an extremely versatile
product offering 12 operating modes applied to two timed output relay
contacts. When only one of the timers is being used, the other output acts
as an instantaneous set of changeover contacts. A single model provides
timing from 0.1 second to 100 hours.
Powered by either 240Vac, 110Vac or 12-24Vac/dc, the
TTDR features two independent timing circuits and nine different operating
modes including single and dual on-delay, dual interval, off delay, cyclic
and a 24 hour clock. If only one timing circuit is used the other relay is
automatically set to act as an instantaneous changeover contact. The two
models cover supply voltages of 240Vac, 110Vac and 12-24Vdc and with
timing ranges from 0.1 seconds to 100 hours. The DIN rail mounting
package, 80 x 65 x 70 wide, makes the TTDR particularly suitable for
in-panel applications.
