DIGITAL PID CONTROLLERS
|
|
|
|
|
DIGITAL PID CONTROLLERS |
|
|
PID330 1/4 DIN PID TEMPERATURE & PROCESS CONTROLLER |
|
 |
The PID330 is a low cost 1/4 DIN (96 x 96) PID controller with selectable thermocouple , RTD, voltage or current inputs and up to 3 control outputs. It has a large dual 4 digit LED display with separate indicators to show the relay state and autotuning function. Relay, SSR, current or voltage output versions are available. The controller can be configured as 1 on/off or PID control and up to 2 alarm outputs, or as 2 on/off or PID controls (heat/cool) plus alarm output. It has a large dual 4 digit LED display to show the set point and the process value. It is suitable for use with power supplies of 85 to 270 Vac or 24Vac/dc.
|
|
|
|
PID500 1/16 DIN PID TEMPERATURE & PROCESS CONTROLLER |
|
 |
The PID500 is a sophisticated autotuning PID controller with selectable thermocouple, RTD, voltage or current inputs and up to three outputs. Relay, SSR, current or voltage output versions are available. The controller can be configured as 1 on/off or PID control and up to 2 alarm outputs, or as 2 on/off or PID controls (heat/cool) plus alarm output. It has a large dual 4 digit LED display to show the set point and the process value. It is suitable for use with power supplies of 85 to 270 Vac or 24Vac/dc.
|
|
|
|
C1 1/32 DIN PID TEMPERATURE & PROCESS CONTROLLER | |
 |
The C1 is a compact 1/32 DIN (48x24 mm) auto-tune PID controller. The C1 will operate from thermocouple, PT100, 0/10 to 50mV and 0/4 to 20mA inputs and has a relay and an SSR output. It can be used as an indicator with 2 alarms or as a PID or on/off controller with 1 alarm. The unit also incorporates a 18Vdc transmitter power supply and has RS485 communications facilities. Versions are available that operate from 24Vac/dc and 100-230Vac.
| |
|
|
M1 1/16 DIN PID TEMPERATURE & PROCESS CONTROLLER | |
 |
The M1 is a simple to configure 1/16 DIN (48x48 mm) auto-tune PID controller with a single 4 digit LED display. The M1 will operate from thermocouple, PT100, 0/10 to 50mV and 0/4 to 20mA inputs and has 2 relays and an SSR output. It can be used as an indicator with 2 alarms or as a PID or on/off controller with 1 alarm. The unit also incorporates a 18Vdc transmitter power supply and has RS485 communications facilities. Versions are available that operate from 24Vac/dc and 100-230Vac.
| |
|
|
M3 1/16 DIN PID TEMPERATURE & PROCESS CONTROLLER | |
 |
The M3 is a simple to configure 1/16 DIN (48x48 mm) auto-tune PID controller with a dual 4 digit LED display. The M3 will operate from thermocouple, PT100, 0/10 to 50mV and 0/4 to 20mA inputs and has 2 relays and an SSR output. It can be used as a single PID or on/off controller with 2 alarms or as 2 PID or on/off (heat/cool) controllers with 1 alarm. The unit also incorporates a 18Vdc transmitter power supply and has RS485 communications facilities. Versions are available that operate from 24Vac/dc and 100-230Vac.
| |
|
|
M4 1/16 DIN PID TEMPERATURE & PROCESS CONTROLLER | |
 |
The M4 is a full function 1/16 DIN (48x48 mm) auto-tune PID controller with a dual 4 digit LED display. The M4 will operate from thermocouple, PT100, 0/10 to 50mV and 0/4 to 20mA inputs and has 3 relays and an SSR output as well as an optional 4-20mA control output. It can be used as a single PID or on/off controller with 2 alarms or as 2 PID or on/off (heat/cool) controllers with 1 alarm. The unit also incorporates a 18Vdc transmitter power supply and has RS485 communications facilities. Versions are available that operate from 24Vac/dc and 100-230Vac.
| |
|
|
M5 1/16 DIN PID TEMPERATURE & PROCESS CONTROLLER/PROGRAMMER | |
 |
The M5 is a 1/16 DIN (48x48 mm) PID auto-tune set-point programmer with a dual 4 digit LED display, a sampling time of 0.1 seconds and up to 16 program segments. The M5 will operate from thermocouple, PT100, 0/10 to 50mV and 0/4 to 20mA inputs and has 3 relays and a 4-20mA control output. It can be used as a single P, PD, PID or on/off controller with 2 or 3 alarms or as 2 P, PD, PID or on/off (heat/cool) controllers with 1 or 2 alarms. The unit also incorporates a 18Vdc transmitter power supply and has RS485 communications facilities. Versions are available that operate from 24Vac/dc and 100-230Vac.
| |
|
|
|