Tempatron - Accessories for our temperature controller, process controller and timer products


	*ACCESSORIES*

	*PULSE FREQUENCY DIVIDER*
		This unit will accept a train of pulses from a wide variety of electronic sensors such as flow meters, rotary encoders, optical sensors or proximity sensors and provide a scaled output pulse. Either NPN or PNP input pulses can be accommodated and output pulse scaling is adjustable between divide by 1 and divide by 4095. Versions are available that will operate from 110/240Vac and 24Vac power supplies. The unit is suitable for scaling the input pulse to our Tachometer relays. _________________________________________________________________________

PRE SERIES LED TOWER LIGHT BEACONS

The PRE series of LED tower lights are a long life alternative to incandescent lamp types. They provide high brightness indication of machine conditions without the problems of limited bulb life. Light from the LED's is diffused via an inner reflector through the impact and heat proof polycarbonate lens.

Towers are available in a number of standard colour formats but individual units are also available to allow the assembly of custom layouts. Flashing indication and an audible alarm can also be specified.

Long life and reliability of LEDs for the price of incandescant lamp versions - 3 colour towers start under £65, 4 colours under £100 - fully assembled, including the tube and flange ...... add a flasher unit from under £13 ...... or a buzzer from under £15

_________________________________________________________________________

	*OUTPUT CONVERSION MODULES*
		These modules can be connected to the SSR output of an IR32 or IRDR controller and will convert the 10V PWM output into a 0-10V, 4-20mA or on/off relay output. All models operate from a 24Vac supply voltage. Whilst they were designed specifically for use with the IR range of temperature controllers, they can be used in conjunction with any controller that has a 10Vdc PWM or 10Vdc on/off output. _________________________________________________________________________

	*POWER SUPPLY TRANSFORMERS*
		These transformers enable the Carel IR32/IRDR controllers or Tempatron TT32/TTDR timers to be supplied from 110Vac or 240Vac. They provide a low cost solution for mains operated systems and with a 3VA rating are useful for driving other low voltage monitors, alarms or control circuits that require a 12V supply. _________________________________________________________________________

	*INFRA RED REMOTE PROGRAMMER*
		Two models of the remote programmer are available for the IR32 and IRDR controllers, one for the refrigeration controllers type S, Y and C and the other for the general purpose temperature/process controller types V, W & Z. These programmers enable fast, direct access to the controller parameters, without the need for multiple key presses. It is possible to program either single or multiple units according to an address code in the controllers. The programmers are powered by 2 x AAA, 1.5V alkaline batteries. _________________________________________________________________________

	*PANEL & DIN RAIL MOUNTING SOCKETS*
		The AZ and ERS series are a range of compact sockets manufactured in flame retardant UL94 V0 rated, Nylon PA6 and suitable for DIN-rail, panel or chassis mounted products. All screw terminals are shrouded and finger proofed to maximise safety. Terminals are rated 10A & 5A/250Vac respectively. The ERS14SS socket is designed primarily to suit the Tempatron MT4L timer but may also be used for any miniature 4 pole relay of similar pin-out. _________________________________________________________________________